C.S. UNITEC Tools
-
C.S. UNITEC EHR-23/2.4-S-Set - Hand-held Mixer, 0-250/0-580 speed, 14.5 amp with MG 160 paddleBack OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC EHR-23/2.4S-220 - EHR 23/2.4 S Hand-Held mixer with 2-speed gearbox, 0-250/0-580 RPM, 220V with MG 160 paddleBack OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC EHR-32/2.4-P - Electric Motor for PORTAMIX HIPPOBack OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC EHR-750-B - EHR 750 B Gas-Powered mixer, 0-450 RPM, 1 HP, with MG 140 paddleBack OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC EKF-300.3 - Beveling Machine, 3000 SFPM, 13.5 Amps, 110V, 30 edge angle, Wt: 15 lbs.Back OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC EKF-300.3-220V - Beveling Machine, 3000 SFPM, 220V, 30 edge angle, Wt: 15 lbs.Back OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC EKF-450.3 - Beveling Machine, 3000 SFPM, 13.5 Amps, 110V, 45 edge angle, Wt: 15 lbs.Back OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC EKF-450.3-220V - Beveling Machine, 3000 SFPM, 200V, 45 edge angle, Wt: 15 lbs.Back OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC EKF-452.3 - Beveling Machine, 3000 SFPM, 13.5 Amps, 110V, 2.5mm radius, Wt: 15 lbs.Back OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC EKF-452.3-220V - Beveling Machine, 3000 SFPM, 220V, 2.5mm radius, Wt: 15 lbs.Back OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC EKF-630 - Beveling Machine, 3000 SFPM, 19 Amps, 110V, 30 edge angle, Wt: 15 lbs.Back OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC EKF-645 - Beveling Machine, 3000 SFPM, 19 Amps, 110V, 45 edge angle, Wt: 15 lbs.Back OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC ELS-225.1 - Long-Reach Drywall Sander, 9" disc diameter, 5.5 Amp/110 V, Variable Speed: 1,050-1,160 RPMBack OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC EMF-150.1 - 20 Amp, 110V, two premium 6" dia. blades, 1-3/4" milling depth, 1-13/16 max. slot width, Wt: 13 lbs.Back OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC EMF-180 - Wall Slotter, 20 Amp, 110V, two premium 7" dia. blades, 2-2/5" milling depth, 1-4/5 max. slot width, Wt: 16.5 lbs.Back OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC END-130/3.1-PO - Hand-Held Core Drill, Wet, Electric, 15 Amp, 600 / 1300 / 2800 RPM, Wt: 16 lbs.Back OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC END-130/3.1-POSA - Core Drill END 130/3 PO, Anchor Stand BST 104/60, w/60mm Motor Mount, Wt: 37 lbs.Back OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC END-130/3.1-POSV - Drill Rig: END 130/3 POSA w/Vacuum Pump 253 511 & fittings, Wt: 45 lbs.Back OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC END-130/3.2-PO - Hand-Held Core Drill, Wet, Electric, 15 Amp, 600 / 1300 / 2800 RPM, Wt: 16 lbs.Back OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC END-130/3P-230V - Hand-Held Core Drill, Wet, Electric, 230V, 600 / 1300 / 2800 RPM, Wt: 16 lbs.Back OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC END-1521-PC - Hand-Held Core Drill, Wet, Electric, 13.6 Amp, 6,000 RPM, Wt: 8.5 lbs. (with 3 diamond core bits)Back OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC END-1521-PCSA - Core Drill END 1521 PC, Anchor Stand BST 85, w/60mm Motor Mount, Wt: 24.5 lbs.Back OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC END-1521-PSV - Drill Rig: END 1521 PSV w/Vacuum Pump 253 511 & fittings, Wt: 32.5 lbs.Back OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC END-1550-P - Hand-Held Core Drill, Wet, Electric, 13 Amp, 1800-4400 RPM, Wt: 7.9 lbsBack OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC END-712 - Mini Wet Diamond Drill, 6 Amp, 0 - 8000 RPM, Wt: 5.7 lbs.Back OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC END-712-P - Mini Wet Diamond Drill, 6 Amp, 0 - 8000 RPM, Wt: 5.7 lbs.Back OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC END-712-PC - Mini Wet Diamond Drill Kit, END 712 P with case, centering aid and 3 diamond bitsBack OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC END130/3.1-POSA - Core Drill END 130/3.1 PO, Anchor Stand BST 104/60 V, w/60mm Motor Mount, Wt: 37 lbs.Back OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC END130/3.1-POSV - Core Drill END 130/3.1 PO, Anchor Stand BST 104/60 V, w/60mm Motor Mount, Wt: 45 lbs.Back OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC END130/3.2-POSA - Core Drill END 130/3.1 PO, Anchor Stand BST 104/60 V, w/60mm Motor Mount, Wt: 37 lbs.Back OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC END130/3.2-POSV - Core Drill END 130/3.1 PO, Anchor Stand BST 104/60 V, w/60mm Motor Mount, Wt: 45 lbs.Back OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC EOF-100 - Paint Shaver / Milling Machine, 13 Amp, 110V, 10,000 RPM, 4" milling head dia., 0.1 to 1.0mm depth adjustmentBack OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC EOF-100-220V - Paint Shaver / Milling Machine, 220V, 10,000 RPM, 4" milling head dia., 0.1 to 1.0mm depth adjustmentBack OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC EOF-100-CT - EOF 100 Concrete/Hard Material Kit with 37125000 PCD Milling Disc, 13 Amp, 110V, 10,000 RPM, 4" milling head dia., 0.1 to 1.0mm depth adjustmentBack OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare
-
C.S. UNITEC EOF-100-WD - EOF 100 Wood Kit with 37124000 Carbide Milling Disc, 13 Amp, 110V, 10,000 RPM, 4" milling head dia., 0.1 to 1.0mm depth adjustmentBack OrderedAdd to Wish ListBack Ordered - Awaiting Arrival From Manufacturer. Approximately 7 to 10 Business Days to ShipAdd to Compare